Real Time Automation

Real Time Automation

Share

We create connectivity solutions for Industrial & Building Automation. Save time, money & headaches with simple gateways & industry leading support.

11/12/2026

Why does digital transformation often stall on the factory floor?

Come see RTA founder John Rinaldi tackle this exact challenge as he presents at the 2026 Internet of Things for Manufacturing (IoTfM) Symposium! John will be joining other industry experts as they share real-world use cases, practical implementation approaches and hard-earned lessons from the front lines of manufacturing innovation.

Topic: Why the Digital Transformation Often Dies a Slow Death on the Factory Floor
Date: Wednesday, November 18, 2026
Time: 2:30 PM
Location: Georgia Tech Advanced Manufacturing Pilot Facility – 555 14th Street NW, Atlanta, GA

The IoTfM is part of a 2-day event, Digital Transformation in Manufacturing, running November 17-18th. Check out the full schedule and secure your spot on the Georgia Tech Manufacturing Institute website: https://b.gatech.edu/3Uy1pDa

11/11/2026

What if your protocol gateway arrived ready to install so you can save room for more important engineering work?

Manually configuring unit after unit eats up valuable engineering hours that should go to system design rather than spent on repetitive setup.

Our Enginerds can adjust an off-the-shelf protocol gateway to fit your application or pre-load it with your custom configuration. Either way, every unit arrives set, defaulted and ready to serve. With a pre-configured RTA protocol gateway, you can:

• Keep a spare on the shelf that’s ready to swap in
• Scale deployment across large or complex facilities
• Ship identical skids with no setup in the field

There’s no order minimum, and whether you need 1 or 100, your custom gateway is in stock and ready to ship.

Let us handle the prep work so you can save your energy for the main course. Customize your RTA gateway: https://bit.ly/3LxSxsq

11/05/2026

Got a Modbus mapping project that nobody wants to carve into?
Manually mapping register tables and data points wastes valuable hours that are better spent managing your network, optimizing system performance or getting home in time for dinner.

RTA’s Enginerds can build pre-defined data maps tailored specifically to your application. Send us your target protocol and the list of data points you need mapped, and we’ll whip up a template file that automatically populates the data map inside your RTA gateway.

• Map it once and apply it across multiple gateways
• Load the template into existing gateways with one click
• Get new gateways delivered with the template pre-loaded
• Avoid manual entry errors on high-density, complex data maps

For Modbus alone, our Enginerds have integrated over 400 unique devices from more than 70 vendors.

See what’s cooking with our Modbus data mapping services: https://bit.ly/4ejt6X7

10/29/2026

Why force your barcode scanner to sit next to your PLC?

Serial cables are great for local connections, but distance limitations tether your devices to the control cabinet. If your barcode scanner, weigh scale or RFID reader needs to sit across the plant floor, long cable runs aren’t an option.

The new 435NBX-S2E single-port ASCII gateway gives you the freedom to place scanners, scales and ASCII devices exactly where operators need them.
• Mount locally near your device to convert serial ASCII to Ethernet at the source
• Eliminate noisy, long-distance serial runs that cause dropped characters or signal loss
• Place input devices anywhere on the plant floor without being restricted by panel locations or cable distance limits

Stop letting serial cables dictate your operations: https://bit.ly/4tRoHk7

10/23/2026

Michigan automation pros: We’re coming to a city near you!

We’re joining the Kendall Electric Automation Roadshow for three dates across Michigan. Whether you’re looking to simplify protocol integration, connect legacy equipment to modern networks or leverage the data trapped inside your PLCs and field devices, come talk with our Enginerd!

Here’s where we will be:
• Oct 27: Alpena, MI (2:00 PM – 5:00 PM) | Holiday Inn Express & Suites Alpena – Downtown by IHG | Register here: https://bit.ly/3WCn5P6
• Oct 28: Saginaw, MI (10:00 AM – 2:00 PM) | Saginaw Valley State University (Curtiss Hall) | Register here: https://bit.ly/4BhPlqi
• Oct 29: Lansing, MI (10:00 AM – 2:00 PM) | Crowne Plaza Lansing by IHG | Register here: https://bit.ly/3WBdo3u

Stop by to see how RTA can solve your networking and data access nightmares. See you there!

10/21/2026

You already know RTA for serial ASCII string translation for an Allen-Bradley PLC with the dual-port 435NBX. But if your application only needed to bridge a single barcode scanner, scale, RFID reader or other RS-232/RS-485 device, you were stuck paying for an extra port you’d never need.

Say hello to the 435NBX-S2E, a single-port ASCII gateway. This cost-effective solution gives you:
• A brand new hardware platform for ASCII to Allen-Bradley data transfer
• A low-cost hardware footprint featuring a single serial port and single Ethernet port
• Full compatibility with Micro820, Micro850 and Micro870 PLCs alongside CompactLogix, ControlLogix, FlexLogix, MicroLogix, SLC 5/05 and PLC-5E PLCs
• The exact same ASCII string handling you already know and trust
• An ASCII gateway built for industrial environments

Right-size your hardware budget without sacrificing reliability: https://bit.ly/4tRoHk7

10/13/2026

Configuring protocol gateways shouldn’t feel like a treasure hunt for an IP address just to locate your PLC.

With the new 435NBX-S2E ASCII gateway hardware platform, there’s a better way.

Simply log in to the browser-based configuration page and use the PLC Discovery feature to automatically find Allen-Bradley PLCs on your network.

No proprietary software, extra hardware modules or chasing down IP addresses. Complete your setup in just a few minutes and start leveraging ASCII data inside your Allen-Bradley PLCs.

Explore the brand new 435NBX hardware platform, the S2E: https://bit.ly/4tRoHk7

10/08/2026

Stop wrestling with Micro800 serial ASCII drivers.

When you need to parse an ASCII string from a barcode scanner, scale or RFID readers, configuring custom serial drivers can eat up your afternoon really quick.

Let the new 435NBX-S2E single-port ASCII gateway save you the programming headache.
• Direct, native connectivity to Micro820, Micro850 and Micro870 PLCs
• Zero MSG instructions or custom ladder logic
• Proven two-tag length handshake that keeps your scan time clean
• Brand new hardware platform featuring a single serial port and single Ethernet port

Bridge your serial ASCII devices directly to your A-B controllers with a purpose-built platform designed specifically for single-device applications: https://bit.ly/4tRoHk7

-Bradley

09/29/2026

The scariest part of adding a new industrial protocol to your device isn’t writing the code. It’s sending your device to the test lab.

Failing conformance testing costs time, money and momentum. When you buy off-the-shelf source code, you’re usually left reading hundreds of pages of protocol documentation to figure out what went wrong.

When you partner with RTA, you don’t just get a zip file of C code. You get a dedicated team of Enginerds who stay with you until your device is certified:
• Initial code walkthroughs and platform integration guidance
• Custom data modeling support
• Pre-conformance testing in the RTA lab
• An RTA Enginerd to represent your devices at the testing lab

We don't consider the job done until your product is fully certified and shipping.

Schedule a 30-minute webinar with our protocol enablement team: https://bit.ly/4chCiKH

09/23/2026

Spending a year coding an industrial protocol stack from scratch isn’t engineering. It’s reinventing the wheel.

Instead of spending months to years reading dense spec documents, testing edge cases and troubleshooting stack errors, you should be focused on building devices that solve real problems on the factory floor.

That’s where a protocol partner like RTA comes in. RTA protocol source code stacks take integration time down from months to days:
• Pre-built and market-tested ANSI C source code that has already been validated across thousands of real-world applications
• Ready-to-run sample applications to accelerate your initial prototype
• A proven integration process that puts you on a clear path to market and focuses your engineering talent on the features and functions that make your product great

Why spend a year doing what’s already been perfected?

Accelerate your development timeline with RTA source code: https://bit.ly/4chCiKH

Want your business to be the top-listed Engineering Company in Pewaukee?
Click here to claim your Sponsored Listing.

Telephone

Address


N26W23315 Paul Road
Pewaukee, WI
53072

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Alerts

Be the first to know and let us send you an email when Real Time Automation posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Subscribe

We will notify you when anything happens in Pewaukee.