Viser Performance Intakes
For the 4.0 (2005 thru 2016)
-25mm spacer with airflow technology from newer Ford Plenums, improving power, efficiency, and drive-ability.
Viser intakes make small NA Ford engines more efficient & more powerful:
We have the best bolt-on type upgrades available for NA Ford V6s:
-3.5 and 3.7 s (2011 thru 2025)
-4.0 (2005 thru 2016)
Coming soon to a performance parts store ‘near you’! We have the best bolt-on type upgrades available for NA Ford V6s:
For the 3.5 & 3.7 (2011 thru 2025)
-Specially Ported and surfaced Lower Intake Manifold.
-Specially surfaced throttle body adapter, allowing an 80mm Throttle Body to be added to replace the stock 65mm TB.
11/20/2026
Use this tool to estimate the right injector size:
https://viser.us/injector-size-calculator/
The formula used for the calculator is written out below the tool.
If you've dramatically improved horsepower, you may need bigger injectors. If not, probably not. As many know already, bigger injectors don't create more horsepower, then just help high horsepower engines keep up with the extra fuel needs more efficiently.
You don't want your fuel mixture to get too lean......
We hope you like the tool.
Have Fun | Go Fast | Be Safe
Injector Size Calculator | Viser Performance Intakes Injector Size Calculator Estimated Rate for Combustion Engines Maximum Horsepower at the Crank: Number of Injectors: Fuel Type: Avg BSFC Used: 50% Recommended Size (lbs/hr): 36.46 Terminology & Formulas BSFC: Stands for 'Brake Specific Fuel Consumption'. It measures an engine's fuel efficiency—the...
This is my favorite quote of the year, ;'cause I couldn't agree more.
"We love Underdog engines!"
Tony’s Boost Outlet
FAQ:
Just got my first V6 Mustang.
Any advice on Engine Mods?
11/10/2026
Had a post season check up on our test car - 2014 Mustang V6.
-Control arm bushings took a beating.
-Brake fluid was filthy! I’m told I need braided brake lines - fluid was changed at the beginning of the season.
Does that make sense?
-Oil was great.
-Transmission Fluid was great.
-Tires will be good for 3 to 5 more Autocross events next season!
The engine performs great with the bolt-ons and the MPT 93 tune!
11/07/2026
The more I learn about Autocross racing, the more embarrassed I am about what I thought I new.
Trust this though, It's fun at any level - Well, all the level's I've raced at up to now.
If you can make the time, tell us about your racing experience, accomplishments, and plans. Please include a pic or a video - I've learned a lot just from watching them. Joe T Ribeiro
11/06/2026
I’m not surprised. We put divots on the surface of our adapters to move air more quickly and efficiently thru a portal with a slightly decreasing radius, and it works!
Despite weighing 40 tons and being the size of a school bus, the humpback whale can roll and bank in tighter underwater circles than almost any other large marine animal.
Biomechanics researchers Dr. Frank Fish and Stephen Dewar discovered the secret lies in the row of large, irregular bumps — called “tubercles” — lining the front leading edge of the whale’s 16-foot pectoral flippers.
When tested in naval wind tunnels by Canadian engineering company WhalePower, those leading-edge bumps defied conventional aerodynamic wisdom.
Instead of disrupting airflow, the scalloped bumps channel wind through the troughs into pairs of tight, counter-rotating micro-vortices that keep air glued to the back of the wing at steep 40% higher angles without stalling.
Applied to wind turbine rotors, industrial ventilation fans, and aircraft wings, the biomimetic tubercle edge cuts drag by up to 32%, quietens blade noise, and allows wind turbines to capture 20% more electricity in gusty or slow winds.
11/05/2026
We got another shipment of spacers with blades for the 4.0 Mustang. These things really work!
The new ones have the Viser Logo on them, which leaves no doubt which end is up and which side is the front!
Here’s a recent question from Texas, which gave me a chance to talk about my favorite 3.7 mods:
“What are the HP gains from the ported lower?”
Q: Have you thought about making a TB spacer with blades for the 2001-2011 4.0 ranger?
10/21/2026
Welcome to all our new followers!
Have a question? Feel free to reach out at [email protected], or join our discussion group - NA V6 Mustangs.
About Viser:
We're a small company with a strict focus:
-Bolt-on-type upgrades for most Ford 3.7s, 3.3s, and 3.5s.
-Our research also inspired a great product for the 4.0 V6.
Our test car was the inspiration for Viser:
It's a 2014 NA V6 Mustang, and it has been modded into a Fast and Fun Autocross car.
Enjoy our content, and as always,
Drive Fast | Have Fun | Be Safe
Click here to claim your Sponsored Listing.
Category
Contact the business
Address
74 West Fountain Avenue
Delaware, OH
43015
Other Automotives in Delaware
Show All1599 Columbus Pike
Delaware, 43015
I've been with Byers Toyota for nearly 7 years, & can't wait to take care of you on your next vehicle
Section Line Road
Delaware, 45015
building traditional rods and wooden boats from the 60's
Delaware, 43015
Xtra rare car detailing is your go to for high quality car detailing located in delaware ohio but will travel through ohio Owner Ryan Valenzuela
Alerts
Be the first to know and let us send you an email when Viser Performance Intakes posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.